Rod end DIN ISO 12240-4 K series steel/steel version female thread 12 M12LH Steel galvanised
suitable for high unidirectional thrust loads, application only for low swivelling movements, unsuitable for complete revolutions
The boring in the steel housing is cylindrically taper-bored from one side and starts from the middle depending on the shape of the ball. This enables a high thrust load towards the ball mug.
货号
11 57 6481 1012/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series steel/steel version female thread
Größe
12 M12LH
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
d
12
d Tolerance
H7
A
12
B
16
d1
15,4
d2
32
d3
M12 x 1,75 LH
螺纹版
Regular thread left
d4
17,5
d5
22
h1
50
l3
22
l4
66
sw
19
Static basic load rating C0 (kN)
35
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,01 - 0,06
Mass (g) per piece
115
润滑
The steel/steel version is supplied without a lubricating nipple; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +200 °C