Rod end DIN ISO 12240-4 K series standard version male thread 18 M18FG Steel galvanised
can be regreased, suitable for axial thrusts
* only recommended for short-term running
货号
16 50 6481 2018/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series standard version male thread
Größe
18 M18FG
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
Bearing shell: special brass CuZn38Al1
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
d
18
d Tolerance
H7
A
16,5
B
23
d1
21,8
d2
46
d3
M18 x 1,5 FG
螺纹版
Fine-pitch thread right
h
72
l1
44
l2
95
Static basic load rating C0 (kN)
43
Permissible rpm*
320
Angle of misalignment a°
15
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
267
润滑
from size 6 via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +200 °C