回到首页

Rod end DIN ISO 12240-4 K series maintenance-free stainless steel with sealing female thread 10 M10

suitable for high dynamic pressure loads and tensile forces

* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 56 6483 1010/000
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series maintenance-free version stainless steel with sealing female thread
Größe
10 M10
材料组
Stainless steel
表面
bright
材料

Housing: stainless steel 1.4057 (X17CrNi16-2), forged, polished

Bearing shell: special bronze CuSn8 with glued-in PTFE fabric on the bearing surface, alternative: stainless steel 1.4571 (X6CrNiMoTi17-12-2)

Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished or stainless steel 1.4404 (X2CrNiMo17-12-2), unhardened, grinded, polished

Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline

Fitting rings: brass

Distance liner: stainless steel 1.4305 (X8CrNiS18-9)

d
10
d Tolerance
H7
A
10,5
B
21
B Tolerance
d1
12,9
d2
28
d3
M10 x 1,5
螺纹版
Regular thread right
d4
15
d5
19
d7
8
d8
12,5
d9
21
h1
43
l3
20
l4
57
sw
17
Static basic load rating C0 (kN)
28,3
Permissible rpm*
350
Angle of misalignment a°
10
Bearing radial tolerance in mm min. - max.
0,005 - 0,030
Mass (g) per piece
76
润滑
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +150 °C
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
maintenance-free
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C