Rod end DIN ISO 12240-4 K high performance version with threaded bolt male thread 8 M8 Steel galv.
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
货号
10 51 6482 2008/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version with threaded bolt male thread
Größe
8 M8
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
d
8
d Tolerance
H7
A
9
B
12
d1
10,4
d2
24
d3
M8 x 1,25
螺纹版
Regular thread right
d6
10,5
h
42
l1
25
l2
54
l6
23,5
l7
6,5
l8
13
sw1
8
Static basic load rating C0 (kN)
11
Permissible rpm*
1200
Angle of misalignment a°
14
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
45
润滑
from size 6 via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C