Rod end DIN ISO 12240-4 K high performance version with threaded bolt female thread 10 M10 Steel
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
货号
10 51 6482 1010/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version with threaded bolt female thread
Größe
10 M10
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
d
10
d Tolerance
H7
A
10,5
B
14
d1
12,9
d2
28
d3
M10 x 1,5
螺纹版
Regular thread right
d4
15
d5
19
d6
13
h1
43
l3
20
l4
57
l6
28
l7
7
l8
17
sw
17
sw1
12
Static basic load rating C0 (kN)
19,3
Permissible rpm*
1000
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
101
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C