Rod end DIN ISO 12240-4 K high performance version with sealing female thread 14 M14 Steel galv.
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 51 6483 1014/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version with sealing female thread
Größe
14 M14
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
d
14
d Tolerance
H7
A
13,5
B
26
B Tolerance
≈
d1
16,8
d2
36
d3
M14 x 2
螺纹版
Regular thread right
d4
20
d5
25
d7
12
d8
17
d9
29
h1
57
l3
25
l4
75
sw
22
Static basic load rating C0 (kN)
21
Permissible rpm*
750
Angle of misalignment a°
12
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
170
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C