Rod end DIN ISO 12240-4 K high performance for high load with threaded bolt male thread 12 M12
can be regreased, suitable for high pressure loads and tensile forces
* only recommended for short-term running
货号
10 53 6482 2012/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version for high load with threaded bolt male thread
Größe
12 M12
材料组
Steel
表面
galvanised
材料
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
d
12
d Tolerance
H7
A
12
B
16
d1
15,4
d2
32
d3
M12 x 1,75
螺纹版
Regular thread right
d6
15
h
54
l1
32
l2
70
l6
32,5
l7
7,5
l8
20
sw1
14
Static basic load rating C0 (kN)
42
Permissible rpm*
860
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
127
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C