Rod end DIN ISO 12240-4 K high performance for high load with sealing female thread 8 M8 Steel
can be regreased, suitable for high pressure loads and tensile forces
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 53 6483 1008/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version for high load with sealing female thread
Größe
8 M8
材料组
Steel
表面
galvanised
材料
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
d
8
d Tolerance
H7
A
9
B
19
B Tolerance
≈
d1
10,4
d2
24
d3
M8 x 1,25
螺纹版
Regular thread right
d4
12,5
d5
16
d7
6
d8
10,5
d9
18
h1
36
l3
16
l4
48
sw
13
Static basic load rating C0 (kN)
25,5
Permissible rpm*
1200
Angle of misalignment a°
10
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
46
CETOP
CETOP RP 103 P
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C