Rod end DIN ISO 12240-4 K series high performance version for high load male thread 10 M10LH Steel
can be regreased, suitable for high pressure loads and tensile forces
* only recommended for short-term running
货号
11 53 6481 2010/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version for high load male thread
Größe
10 M10LH
材料组
Steel
表面
galvanised
材料
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
d
10
d Tolerance
H7
A
10,5
B
14
d1
12,9
d2
28
d3
M10 x 1,5 LH
螺纹版
Regular thread left
h
48
l1
28
l2
62
Static basic load rating C0 (kN)
31,4
Permissible rpm*
1000
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
56
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C