Rod end DIN ISO 12240-4 K series high performance version female thread 2 M2 Steel galvanised
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
货号
10 51 6481 1002/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version female thread
Größe
2 M2
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
d
2
d Tolerance
H7
A
3,6
B
4,5
d1
2,6
d2
9
d3
M2 x 0,4
螺纹版
Regular thread right
d4
3,8
d5
4,5
h1
16
l3
7
l4
20,5
sw
4
Static basic load rating C0 (kN)
3
Permissible rpm*
-
Angle of misalignment a°
16
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
3
润滑
from size 5 via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C