Pivoting bearing DIN ISO 12240-1 K series standard version 12 Steel galvanised
can be regreased, suitable for axial thrusts
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7
货号
10 70 0000 0012/013
标识符
Pivoting bearing DIN ISO 12240-1 (DIN 648) K series standard version
Größe
12
材料组
Steel
表面
galvanised
材料
Outer ring: undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
Bearing shell: special brass CuZn40Al1
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
d
12
d Tolerance
H7
A
12
B
16
d1
15,4
d2
30
d2 Tolerance
h6
Static basic load rating C0 (kN)
40
Permissible rpm*
450
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,05
Mass (g) per piece
58
润滑
regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Pivoting bearing
Series
K series
Maintenance
needs maintenance
Threaded bolt
No
Sealing
No
Suitable for clevises
No