Pivoting bearing DIN ISO 12240-1 K maintenance-free without outer ring with threaded bolt 5 Steel
suitable for high pressure with dynamic loads
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
货号
10 76 6482 0005/013
标识符
Pivoting bearing DIN ISO 12240-1 (DIN 648) K series maintenance-free version without outer ring with threaded bolt
Größe
5
材料组
Steel
表面
galvanised
材料
Bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised, with glued-in PTFE fabric
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
Threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
d
5
d Tolerance
H7
A
6
B
8
d1
7,7
d2
13
d2 Tolerance
h6
d3
M5 x 0,8
螺纹版
Regular thread right
d6
7,8
l6
16
l7
5
l8
9
sw1
7
Static basic load rating C0 (kN)
12,5
Permissible rpm*
600
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
11
润滑
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +200 °C
Rod end_Pivoting bearing
Pivoting bearing
Series
K series
Maintenance
maintenance-free
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No