If DIN rod ends don’t meet your requirements then we can produce special rod ends based on your customer drawings. Configure your custom rod end from an optimally harmonized combination of housing, bearing shell and inner ring. Are you still at the ideas stage or do you already have concrete load specifications? Whatever the case, mbo Osswald will provide you with the support you need.
Range of services for custom rod ends (extract)
Material |
- Housing
- Undercut steel
- Stainless steel A2 quality
- Stainless steel A4 quality
- Thermal treatment steel
- Spherical cast iron GS400
- St 52-3
- Bearing shell
- Undercut steel
- Stainless steel A2 quality
- Stainless steel A4 quality
- Special brass
- Special bronze
- Internal ring
- Ball bearing steel
- Stainless steel A2 quality
- Stainless steel A4 quality
Other steels that are particularly corrosion-resistant, salt water-resistant or heat-resistant, as well as high-tensile steels |
Surface |
- Housing
- galvanised
- polished
- high-gloss nickel-plating
- Internal ring
- hardened
- grinded
- polished
- hard chrome-plated on the bearing surface
|
Configurable |
- Bearing
- Angle of misalignment
- Bearing tolerance (low-play / restricted C2 / extended C3)
- Ball bore
- can be regreased / maintenance-free
- Lubricating nipple
- Size
- with sealing (unidirectional / on both sides)
- with threaded bolt
- with protective rubber cap
- Housing
- Head diameter
- narrow / wide head (E series / K series)
- Shaft
- Weld-on end
- Hole instead of thread
- metric or inch thread
|
Options |
|
|
